This time, let's talk about the technical characteristics of high-power induction cookers. Induction cookers are well-known to everyone, and they are now commonly used in every household. They are much more convenient and safer than traditional gas stoves. However, the type of induction cooker I'll discuss this time is not suitable for household use; it is mainly used in commercial kitchens. Let PXKITCHEN take you through the details:
-
Self-Protection Performance:
- The output switch tube is a crucial component of the induction cooker, operating under high voltage and high power conditions. Due to cost and device parameter limitations, there cannot be a large amount of data in the design. Therefore, during operation, if the power supply voltage is too high, the switch state is subject to instantaneous impact, the current increases, the machine temperature is too high, leaving the circuit board or idle, the switch tube may be damaged. Hence, it's essential to ensure that overvoltage, overcurrent, overtemperature, pot detection, and other protective devices work properly.
-
Characteristics of Bottom Temperature Control:
- The heat from the bottom of the pot is directly transferred to the cooker plate. The cooker plate is a conductive material, so the thermal sensor is usually installed at the bottom of the cooker plate to detect the bottom temperature of the pot.
-
Electromagnetic Compatibility:
- Its performance is related to the interference with other household appliances and the harm to the human body. A filter circuit is added to the power circuit to absorb leakage magnetism using a metal frame. At the same time, the average radiated power is controlled to a minimum through a pulse method.
-
Reliability and Effective Service Life:
- The reliability index of the induction cooker is generally represented by MTBF, in units of "hours." A high-quality induction cooker should have an MTBF of over ten thousand hours. The service life of the induction cooker mainly depends on the working environment of the enterprise, maintenance, and the quality of major functional components.
These are the technical characteristics of high-power induction cookers. If you're interested, you can learn more about them. For further information, please visit the official website of PXKITCHEN equipment in Guangdong.
